2 using the scanner glass, Copy 44 – Panasonic KX-FLB851 User Manual

Page 46

Advertising
background image

6. Copy

44

2. Press {V} or {^} repeatedly to select the

desired contrast.

L

To make lighter, press {V}.

L

To make darker, press {^}.

Note:

L

You can save the previous contrast setting in
feature #462 (page 66).

To select the input tray and paper size

1. Press {PAPER TRAY}.

2. Press {V} or {^} repeatedly to select the

desired input tray.

IN TRAY #1”: Paper input tray

IN TRAY #2”: Multi-purpose input tray

L

When the optional input tray is installed,
the following will be added to the settings.

IN TRAY #3”: Optional input tray

IN TRAY #1#3”: Paper input tray and

optional input tray

3. Press {<} or {>} repeatedly to select the

desired paper size.

LETTER”: Letter size paper

A4”: A4 size paper

LEGAL”: Legal size paper

L

When the input tray is set to

IN TRAY

#1” or “IN TRAY #1#3”, you cannot
select

LEGAL”.

Note:

L

You can also set the input tray setting in
feature #460 (page 66).

L

You can also set the paper size in feature
#380 (page 62), #381 (page 62) or #382
(page 62). If the selected paper size of
#380 and #382 are not same,

IN TRAY

#1#3” will not be displayed in this setting.

6.2.2 Using the scanner glass

L

Confirm that there are no documents in
the auto document feeder.

1

If the {COPY} light is OFF, turn it ON by
pressing {COPY}.

2

Set the original.

1. Open the document cover (

1).

2. Place the document FACE DOWN on the

scanner glass, matching the top edge of
the document to the l mark on the unit.

3. Close the document cover.

L

If the original is a thick book, do not
close the document cover.

3

If necessary, change the following settings
according to the type of document.

L

To select the resolution, see page 43.

L

To select the contrast, see page 43.

L

To select the input tray and paper size,
see page 44.

4

If necessary, enter the number of copies (up
to 99).

5

Press {START}.

L

The unit will start copying.

6

After you finish copying, press {STOP} to
reset the settings you set in step 3.

To stop copying

Press {STOP}.

{

START}

{

COPY}

1

{

STOP}

FLB851-PFQX2175YA-en.book Page 44 Thursday, September 8, 2005 2:24 PM

Advertising