Sms archive, E-mail, Settings – Philips 1800 User Manual
Page 47: E-mail p39
Messages
39
SMS Archive
This menu allows you to consult all read
messages you saved and to
Delete
all
archived messages at once. You save a
message by activating the
Auto save SMS
option (see
above), or by selecting a received message, pressing
,
twice and selecting
Move to Archive
.
If not included in your phone subscription, you must
subscribe to an e-mail account and have received the
settings information from your provider. In this case,
all parameters are communicated to you by your
provider and/or operator as described below and must
be entered as given. In some cases, your operator might
also be your e-mail service provider.
This menu allows you to send and
receive e-mails, with or without
attachements. If your phone was pre-
configured, the parameters are already
set and you don’t have to change them, except for
Login
,
Password
and
E-mail address
which are up to you
when creating an e-mail account.
To enter specific signs such as @ or %, see page 13.
Settings
Press
,
, select
Messages
>
>
E-mail 1
and
press
,
. Then select
Settings
and press
,
to
access the following options:
Auto save
SMS
Allows you to set
On
or
Off
this option,
which will automatically save messages
sent in the
Archive
menu.
SMS Archive
Account
name
To rename
E-mail 1
and
E-mail 2
boxes.
An e-mail account might be predefined
and locked, preventing renaming.
E-mail
server
To configure the settings needed to
connect to the e-mail server of your
Internet Service Provider (ISP).
In some cases,
Login
,
Password
and
E-mail address
are up to you when you
subscribe to your account. Enter them
as defined. The
POP3 address
is used to
receive e-mails, whereas the
SMTP
address
is used to send e-mails.
WARNING ! For an e-mail connection via GPRS, if your
phone operator is NOT your e-mail provider, contact them
to get the correct address of the SMTP server.
Philips755_GB_4311 255 58342.book Page 39 Jeudi, 14. octobre 2004 7:01 19