Pandigital PI8004W01 - Manual (Page 39)

39
3. Select
Get Claim Token 1
. A new Claim Token will be
displayed, which you will need in the next step.
4. On your PC:
Go to http://frameit.live.com/device/claim.aspx to enter
the Claim Token, and then click Continue .
5. On the DPF:
On the
FrameIt
screen, be sure the Status changed from
Registration Required to Registered .
6. If applicable, repeat steps 3-5, selecting Get Claim Token 2
to connect with your second FrameIt account.
7. Select Connect to display the
Photo Sharing
screen. The
FrameIt status should change from Setup Required to
Setup Done .
8. Proceed to step 2 in following View FrameIt RSS Feeds
instructions.
View FrameIt RSS Feeds
)
IMPORTANT: This step assumes that you have already
successfully connected the DPF with the Windows
Live FrameIt site per previous instructions.
1. On the
HOME
screen, select Wi-Fi .
2. On the
Photo Sharing
screen, select FrameIt.
3. The RSS feed folders that you assigned on frameit.live.com
will be displayed; the titles will appear as you highlight the
folders. Press
ENTER to display the contents of a highlighted
folder.
Wait for the feed data to appear; the length of time it takes to
appear depends on the amount of feed data contained within
the selected folder. For instance, a folder that contains a
large number of photos will take substantially longer to
display than when you select News or Weather feeds.
TIP: If you make changes to your Windows Live FrameIt account
while your DPF is connected (i.e., create new collections),
the new feed data will not display until you disconnect and
re-connect with FrameIt.