Panasonic UF-890/990 - Manual (Page 127)

Sub-Addressing
127
N
etw
ork
Fe
a
ture
s
Using One-Touch/ABBR. Number Dialing
The operation is the same as for normal dialing
Using Manual Number Dialing
Use
to separate the Telephone number and the Sub-address.
NOTE
1. separates the Sub-address from the Telephone number and is indicated by an
"s" in the display.
2. Manual Off-Hook or On-Hook Dialing cannot be used with the Sub-addressing Transmission.
3. The Sub-address is not transmitted during Manual Redial Mode.
To send a Document with Sub-address
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Ex:
<01>(Station name)
5551234s2762
3
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
* STORE * NO.001
PAGES=001 01%
1
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
2
Enter the telephone number, press then
enter the Sub-address (up to 20 digits).
(Up to 36 digits including telephone number, pauses,
spaces, FLASH and Sub-address)
Ex: Telephone number = 5551234, Sub-address =2762
Enter as:
TEL. NO.
5551234s2762❚
3
The document is stored into memory and your machine
starts to dial the number of the station and sends the
document(s) with Sub-addressing information.
* STORE * NO.001
PAGES=001 01%
01
START
SUB-ADDR
SUB-ADDR
5 5 5 1 2 3 4
SUB-ADDR 2 7 6 2
START
SUB-ADDR