Procom PN750HYLA - Manual (Page 6)

6
Installation continue
Check to make sure you have the correct parts before
assembling.
. Logs: 5
C aution: Some of the steel edges may be
sharp. Please use caution when assembling
the unit.
INSTALLATION INSTRUCTIONS:
1. Remove log from inside the box. Please note each log fits
the number marked on foam package.
2. Next remove campfire from box.
3. You may use bricks or blocks to create your sur-
round to place your campfire on.
4. Make sure that the campfire is placed on a flat
surface.
5. Check the log piece (FIG-4).
Fig.-4 Check the log piece
6.
Make sure that the logs were installed correctly.
(FIG.-5).(Base logs are pre-installed.)
Fig.-5 Install and check the base logs
7.
Install the No.#1 log as indicated on base log .Fix
the log on the bracket by the screw .
(FIG.-6).
Fig. 6 Install the LOG #1
8.
Install the No.#2 log as indicated on base log.
(FIG.-7).
Fig. -7
install the LOG #2
9.
Install the No.#3 log as indicated on the base log
( FIG.-8).
Fig. -8
install the LOG #3