Philips SPF2307 - Manual (Page 9)

10
Move the joystick to set time and date, •
and then press OK.
Tip
If the PhotoFrame is disconnected from the •
power supply for a long time, you need set
time and date again after you turn on the
PhotoFrame.
Turn off the PhotoFrame
Note
You can only turn off the PhotoFrame after all •
copy and save actions are complete.
To turn off the PhotoFrame, press and •
hold for about 2 seconds.
Turn on the PhotoFrame
Note
When you connect the PhotoFrame to a •
power supply, the PhotoFrame turns on
automatically.
1
When the PhotoFrame is turned off and
connected to the power supply, hold to
turn on the PhotoFrame.
For the first time you turn on the
PhotoFrame:
The screen prompts you to select a •
language.
Select a language, and then press • OK.
The screen prompts you to set time and •
date.
EN