Psion Teklogix ISO 9001 - Manual (Page 67)

WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual 49
Chapter 3: Getting To Know The WORKABOUT PRO
Inserting The SD/MMC Card And SIM Card
The hand-held unit then displays a services list with the Hands Free service type
checked.
• With Hands Free checked (enabled), tap Finish. The headset is now paired.
3.10 Inserting The SD/MMC Card And SIM Card
There are two card slots available in the battery compartment of the hand-held – the
lower slot is provided for a SD/MMC (Secure Digital/Multi-Media Card) and the
upper slot is for a SIM (Subscriber Identity Module) card.
SD/MMC cards provide additional non-volatile memory to your hand-held. SIM
cards provide access to the hand-held’s voice option, the Internet, and so on.
3.10.1 Inserting The Card
• Switch off the WORKABOUT PRO.
• Remove the battery cover and the battery.
A hinged door at the top of the battery compartment protects the connectors. It is
hinged on the left side.
• Pull the hinged SD door down as the arrow icon on the door indicates.
• Orient the SD/MMC or SIM card according to the legend stamped into the
battery well plastic.
• For SD/MMC cards, slide the card into the lower slot, pushing it inward
until it latches into place.
• For a SIM card, slide the card into the upper slot, pushing it inward until it
latches into place.
• Swing the hinged door back into place, and gently snap it shut.
To remove the card:
• Gently press the card inward until it unlatches, and the card is expelled from
the slot.