Panasonic VE-CV02L - Manual (Page 2)

Base unit (VE-CVC02L)
■To make a call
Lift the handset. \ Dial.
■To receive a call
When the phone rings... \ Lift the handset.
■To make a call using the speakerphone
(Hands-free talk)
Dial. \ Press ( - ). \ Talk to the microphone......
To end the call, press .
■To receive a call using the speakerphone
(Hands-free talk)
When the phone rings... \ Press ( - ).
\ Talk to the microphone......To end the call, press .
■To place the current call on hold
Press ( , ) during a call.
Basic Operations
■To use TAM (Telephone Answering Machine)
Set the calendar beforehand.
When you leave home, press ( / ) to turn on the lamp.
(To deactivate, press again to turn off the lamp.)
\ When receiving a call while TAM is activated, it answers
the call automatically in Japanese, and records the incoming
messages.
Then, the lamp starts flashing. \ When you return home,
press to play back the messages.
The lamp turns off and the answering mode is deactivated.
To play back the message while TAM is deactivated, press
( . ).
★ Up to 59 messages can be recorded for 10 minutes in total.
■To transfer the held call to the personal phone
Press ( , ) during a call. \ Press – (Extension
No.). \ Place the handset on the base unit when the other
party answers.
(Call transfer is completed after the other party presses .)
■To retrieve the held call
● During a call through your handset, press ( , ) again.
If you have returned the handset on the base unit, lift the
handset.
● During Hands-free talk, press ( - ).
■To set a calendar
With the handset placed on the base unit, press
\ Enter the year. \ Enter the month in 2 digits and date in 2 digits
(Press for January 1st, for example).
\ Enter the time in 4 digits. (Press for
11:30 P.M., for example). \ Press ( % ) .
■To hear recorded messages while away from home
(Remote control)
Preparation before you leave home
Store a remote control number.
With the handset placed on the base unit, press
\ Enter the desired 4-digit number. \ Press .
When you leave home, press to turn on the lamp.
To hear messages
Dial your home phone number. \ While the outgoing message
is played back... \ Enter your remote control number.
\ Announcement \ Press . \ You will hear recorded
messages if any.
NOTE
B This operation can be made only from telephones which can
send DTMF signals.
Personal phone (VE-CS210A)
■To make a call
Lift the personal phone from the charger or press ( ( ) .
\ Dial.......To end the call, place the personal phone on the
charger or press ( 1 ) .
■To receive a call
When the phone rings... \ Lift the personal phone from the
charger or press . \ Talk......To end the call, place the
personal phone on the charger or press .
■To make a call using the speakerphone
(Hands-free talk)
Lift the personal phone from the charger and press . \
Dial. \ Press ( 2 ). \ Talk to the microphone......To end
the call, place the personal phone on the charger or press .
■To receive a call with the speakerphone
(Hands-free talk)
When the phone rings... \ With the personal phone placed on
the charger, press or .
\ Talk to the microphone......To end the call, press .
■To place the current call on hold
Press ( & ) during a call .
■To retrieve the held call
Press .
■To transfer the held call to the base unit
Press ( 0 ) during a call. \ Press .
\ Place the personal phone on the charger, or press
when the other party answers.(Call transfer is completed after
the other party goes on-hook and off-hook.)
■To set an alarm
This is a one-time alarm setting.
Please set the alarm each time you need it.
Lift the personal phone from the charger and press .
\ Press ( 3 ). \ Enter the time in 4 digits (Press
for 7:30 A.M., for example).
\ Press ( / ). \ Select the tone. (Press ( 1 ) for alarm
tone or press ( 1 ) for ringing tone.) \ Press .
★ " " appears on the display.
• The number after the button shows the location of the
button described in the previous page.
■To transfer the held call to another personal phone
Press ( 0 ) during a call. \ Press – (Extension
No.). \ Press and hold ( % ) until the Speakerphone
lamp lights. \ Press and hold until you finish talking. \
Place the personal phone on the charger, or press when
the other party answers.
(Call transfer is completed after the other party presses .)
★ Each party can speak by pressing . Note that simultaneous
speech is not possible. Only one party may speak at a time.