Printek PrintMaster 850 Series User Manual
Page 118
Genicom 3840 and 3410 ANSI Emulation
112
Sets the vertical and horizontal pitch in decipoints. Parameter (p1) is the spacing between lines and (p2) is
the spacing between characters. Unspecified parameters remain at their current values. This command does
not affect oversized printing selected by ESC [1t.
Character Set
Font And Print Modes
ESC [(p1);…(pn)m
Selects print modes and fonts
P1
Printing Mode
0
normal printing – resets all modes
1
set bold print
4
set underline
5
set doublewide
10 and 11
DF
12
LQ
13
DF
14
LQ
15
Italic DF
16
Italic LQ
17
Italic DF
18
Italic LQ
19
Wide DF
22
cancel bold
24
cancel underline
25
cancel doublewide
Example: set bold print
Escape Sequence:
ESC
[
1
m
Hexadecimal:
1B
5B
31
6D
Partial Line Down (Subscript)
PLD
Moves paper ½ line below the current line for subscript printing.
If 8-bit control code processing is enabled then
Control Code:
PLD
Hexadecimal:
8B
Subscript Printing
ESC K
Moves paper ½ line below the current line for subscript printing. ESC K is also used to return to the original
line following ESC L (superscript).
If 8-bit control code processing is enabled then.