Pioneer PDP 427CMX - Manual (Page 272)

272
RS-232C Adjustment
Command
434CMX
505CMX
Command
425CMX
Command
427CMX
507CMX Function
Number direct
Last
memory
Comment
Effective Minimum Maximum
FAN
FCM + + Maximizes fan rotation control.
FCA
+ + Automates fan rotation control.
– – FCU
Sets integrator’s fan rotation control maximum to apply a
brightness New, and effective
only on the 507CMX
OSD
DIN OSDS00
+ Sets OSD display to OFF.
DIY OSDS01 + Sets OSD display to ON.
– OSSS01
+ Displays expanded OSD.
– OSSS02 + Displays contracted OSD.
– OSAS01
+ Sets the OSD display angle to horizontal.
– OSAS02 + Sets the OSD display angle to vertical.
FRONT INDICATOR
LEN LESS00 + Sets the FRONT INDICATOR to OFF.
LEY LESS01
+ Sets the FRONT INDICATOR to ON.
COLOR MODE
CM1 CLMS00
+ Sets the COLOR MODE to NORMAL.
CM2 CLMS01 + Sets the COLOR MODE to STUDIO.
UNDER SCAN
USCS00
+ +
Sets the UNDERSCAN setting to OFF.
USCS01 + + Sets the UNDERSCAN setting to ON.
USC
+ +
Displays the present set value of UNDERSCAN.
IMAGE PROCESS
– IPR
+ Obtains the present IMAGE PROCESS setting.
– IPRS01 + Sets the IMAGE PROCESS to NORMAL.
– IPRS02
+ Sets the IMAGE PROCESS to PURE.
– IPRS03 + Sets the IMAGE PROCESS to MONOTONE.
– IPRS04
+ Sets the IMAGE PROCESS to HIGH CONTRAST.
– – IPRS05 Sets the IMAGE PROCESS to BLUE ONLY. New
FRC
FRC + + Displays the present set value of FRC.
– FRCS00
+ Sets the FRC to OFF.
FRCS01 + + Sets the FRC to ON. Note 1
SEAMLESS INPUT SWITCH
– SLSS00 + Sets the SEAMLESS INPUT SWITCH mode to OFF.
– SLSS01
+ Sets the SEAMLESS INPUT SWITCH mode to ON.
– SL1S01 + Sets the SEAMLESS SW SELECT 1 to INPUT1.
– SL1S02
+ Sets the SEAMLESS SW SELECT 1 to INPUT2.
– SL1S03 + Sets the SEAMLESS SW SELECT 1 to INPUT3.
– SL1S04
+ Sets the SEAMLESS SW SELECT 1 to INPUT4.
– SL1S05 + Sets the SEAMLESS SW SELECT 1 to INPUT5.
– SL2S01
+ Sets the SEAMLESS SW SELECT 2 to INPUT1.
– SL2S02 + Sets the SEAMLESS SW SELECT 2 to INPUT2.
– SL2S03
+ Sets the SEAMLESS SW SELECT 2 to INPUT3.
– SL2S04 + Sets the SEAMLESS SW SELECT 2 to INPUT4.
– SL2S05 + Sets the SEAMLESS SW SELECT 2 to INPUT5.
MIRROR
MIRS00 + + Sets mirror mode to OFF (normal display).
MIRS01
+ +
Performs left-right reversal with MIRROR MODE.
MIRS02 + + Performs up-down reversal with MIRROR MODE.
MIRS03
+ +
Performs up-down left-right reversal with MIRROR MODE.
MULTI SCREEN
– PTRS00
+ Sets sub screen translucence to OFF (0%).
– PTRS01 + Sets sub screen translucence to 10 %.
– PTRS02
+ Sets sub screen translucence to 20 %.
– PTRS03 + Sets sub screen translucence to 30 %.
– PTRS04
+ Sets sub screen translucence to 40 %.
– PTRS05 + Sets sub screen translucence to 50 %.
– PTRS06
+ Sets sub screen translucence to 60 %.
– PTRS07 + Sets sub screen translucence to 70 %.
– PTRS08
+ Sets sub screen translucence to 80 %.
Note 1: The operation differs between the PDP-434CMX/PDP-505CMX and PDP-425CMX/PDP-507CMX/PDP-427CMX