Pentax 555 - Manual (Page 106)

104
5
Pla
y
ba
ck /
Er
as
ing
Printing Directly from the Camera Connected to
a Printer
When you use the USB cable provided with the camera (I-USB7) to connect the
camera to a printer that supports PictBridge, you can print images directly from
camera without using a PC. The selection of the images to print and the number
of prints are set using the controls on the camera after the camera has been
connected to the printer. You can use settings for printing services to print one
image at a time.
1
Enter the Playback mode, then press the MENU / Fn button.
The Playback menu appears.
2
Use the four-way controller ( 23 ) to
select [PictBridge].
3
Press the four-way controller ( 5 ).
The message “Connect camera & printer” is
displayed.
4
Connect the camera and printer with
supplied USB cable. The image is displayed for printing.
• We recommend that you use the AC adaptor D-AC7J while the camera is
connected to a printer. The printer not operate correctly or image data may
be damaged when the power for the battery runs low while the camera is
connected to the printer.
• Depending on the type of printer, camera settings (such as image quality
and DPOF settings) may not be reflected.
Connecting the camera to the printer
C o n n e c t c a m e r a & p r i n t e r C o n n e c t c a m e r a & p r i n t e r C o n n e c t c a m e r a & p r i n t e r
Exit Exit Exit MENU