Panasonic CQ-DFX572N - Manual (Page 12)

VO LUME
SO
UR
CE
PU
SH
M EN
U
PW
R
TA
AF DISP
CQ-DFX572N
BAND
SET/APM
TUNE
TRACK
OPEN
P·SET/DISC
CD RECEIVER
WITH CHANGER
CONTROL
FOLDER
SRC
TA
DISP
TUNE
TRACK BAND
12
CQ-DFX572N
9
E
N
G
L
I
S
H
Radio Data System (RDS)
(continued)
Traffic Announcement (TA)
Traffic Announcement (TA) Mode
[BAND]
(Set)
TP Seek Tuning
When TA ON is selected, only TP
station will be searched.
Press and hold [[] or []] for
more than 0.5 seconds, then
release. Seeking will start.
TP Auto Preset Memory
When TA ON is selected, only TP
stations will be memorized
automatically. (
a Page 9 for auto
preset memory)
TP Auto Search
When reception of a TP station is
poor, TP Auto Search will auto-
matically search for a TP station
with better reception. (Only when
in Muting in TA Mode.)
Press [TA] on the main unit to switch the TA mode on. (Press again to
switch the TA mode off)
TA ON : If the station received is not a TP station, the unit automatically
searches for a TP station to tune in to it. When the TP station
received begins a traffic announcement, you can hear it from the
unit.
[TA]
(TA mode)
[VOLUME]
(TA Volume)
[VOL}] [VOL{]
(Volume)
[]] [[]
(TP seek tuning)
[BAND]
(Set)
TA Mode
Lights when TA is ON
TA Standby Mode
When set to TA on with the unit in another mode (CD, MP3, CD
changer, AUX), it will automatically switch to radio mode and output
the traffic announcement.
When the traffic announcement has finished, the unit will return to
the previous mode.
TA Volume Set
Traffic announcements are broadcast at the TA volume level.
q Press [MENU] / [SEL] to display the menu.
w Press [}] or [{] to select TA VOL.
e Press [BAND] to store the current volume level as the TA
volume level.
Note: Press [MENU] / [SEL] or [DISP] to return to the regular mode.
Traffic Announcement receiving display
[]] [[]
(TP seek tuning)
[SEL]
(Menu/Return)
[DISP]
(Return)
[DISP]
(Return)
[}] [{] (Select)
[MENU] (Menu/Return)
[}] [{]
(Select)
To listen to only traffic announcements
While listening to an FM station which is not currently
broadcasting traffic announcement, turn the [VOLUME] to the
counterclockwise or press [VOL{] (remote control) to set the
volume to 0. The traffic announcement will be output at the TA
volume level.