Pioneer AVH-P6800DVD - Manual (Page 109)

Mixing AVG-VDP1 beep and
audio sound
When connecting the AVG-VDP1 to this unit, a
beep sound is occasionally outputted from the
AVG-VDP1. To ensure the quality audio sound
from this unit, set this function to
GUIDE to
properly mix the beep sound and the audio
sound.
! You can operate this function only when a
Pioneer Vehicle Dynamics Processor (AVG-
VDP1) is connected to this unit.
! When the multi-channel processor (e.g.,
DEQ-P8000) is connected to this unit, you
cannot use this function.
! We recommend that you select GUIDE to
ensure quality sound.
% Touch NAVI MIX on the initial menu to
switch the mixing of AVG-VDP1 beep.
Touching
NAVI MIX switches the mixing set-
tings between ALL (mixing all the time) and
GUIDE (mixing when a beep sound is out-
putted).
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to
LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
% Touch D. ATT on the initial menu to
switch the digital attenuator setting.
Touching
D. ATT switches the digital attenua-
tor settings in the following order:
HIGH
—LOW
Changing languages for
CAUTION
Some operations on this unit are prohibited
while driving or needs to be paid a careful at-
tention when operating. In such case, a cau-
tion appears on the display. You can change
the language of the cautions at this setting.
% Touch CAUTION on the initial menu to
select your desired language.
Each time you touch
CAUTION, the language
for CAUTION is switched.
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch RESET on the initial menu.
Proceed with reset? appears and asks you to
confirm it.
2 Touch RESET again to reset audio func-
tions.
Reset completed is displayed and the audio
settings are reset.
# To cancel resetting the audio functions, touch
CANCEL.
Entering PIN code for
Bluetooth wireless connection
With some Bluetooth audio players, you may
be required to enter to this unit in advance
PIN code of your Bluetooth audio player, in
order to set this unit ready for a connection
from your Bluetooth audio player.
Initial Setup
En
109
Section
23
Initial
Setup