Panasonic BM-ET500 - Manual (Page 21)

21
General
Power source:
32 V, 3 A DC (when supplied from Control Unit BM-ED500)
24 V, 4 A DC (when supplied from an external power supply device
* )
Power consumption: 30 W (while waiting)
60 W (max. while operating)
Iris recognition time: 3 seconds
Ambient operating temperature: 0 °C to +40 °C {32 °F to 104 °F}
Ambient operating humidity: 30 % to 80 % (relative humidity)
Dimensions: 430 mm (W) x 211 mm (H) x 80 mm (D)
{17 in. (W) x 8-3/10 in. (H) x 3-1/10 in. (D)}
Weight: 4.5 k g {10 lbs.}
Input/Output
CCTV camera output:
1 V[p-p]/75 Ω (Not investigated UL 294)
* The external power supply should meet the following specifications and must be a UL Listed access control power limited
device.
Output voltage: 24 V DC
Output current capacity: 0 A to 4.5 A
Rated ripple voltage/Ripple noise: 150 mV[p-p] or less
Overcurrent protection: Enabled (mandatory)
Note: We recommend the use of a third-party external power supply device when the iris camera is located
more than 20 meters {65 ft.} away from the control unit.
SPECIFICATIONS