PYLE Audio PRJSD188 - Manual (Page 9)

Projector installation
Input port instuction
This projector can support HDMI signal ,component video signal,s-video
VGA, and USB input ,TV signal ,the audio in and audio out function
Adjust the focus lens until the image is clear
Panel brand
Logo
DVD window
The DVD inside or outside
Audio output
It can connect the amplifier
Video input
Disc output key
Press this key can replace the disc
DVD power indicator light
Choose the DVD channel,it is light
Situation indicator light
On DVD mode ,the light is blue ,if you press the
HDMI switch key on the remote ,the light is red
DVD channel,press the menu key,you can choose to play the
video or USB
7
S-VIDEO input
TV signal input
VGA input
Connect PC equipment
Component video input
Audio input
Power switch
HDMI signal input
Ear phone port
DVD audio coaxial output
Cold wind input port
Hot wind output port
HDMI and USB setting
If you want to paly the external HDMI signal or USB function,
,you must choose the DVD channel !
20
Play the external HDMI signal as following::
1.firstly open the projector power,the indicator light is flash,
Then press the power key on the panel or remote control ,
the projector begin to work
2.when blue screen appear ,press the source key on
panel or TV/AV Key on remote control,choose the DVD mode.
You can see the image which play the DVD disc .If you
press the HDMI switch key on the remote control ,it can play
the external HDMI signal .The DVD or HDMI indicator light
become red ,then you can enjoy your program.
Play the USB function as following:
1.firstly open the projector power,the indicator light is flash,
Then press the power key on the panel or remote control ,
the projector begin to work
2.when blue screen appear ,press the
source key on
panel or TV/AV Key on remote control,choose the DVD
mode you can see the image which play the DVD disc .If you
press the Menu key on the remote control (please press
the mode switch key on the remote control,change the
Remote control to DVD mode ) Then entre the DVD system ,
choose the
system setup ,then choose sources . You will
find the choice Disc /USB ,choose the USB and press
confirm key on the remote control. You will play the USB
Function.
Video signal input port