Quic k guide, Step, English – Panasonic SA-XR700 User Manual
Page 7: Connection cable (all cables are sold separately), Hdmi connection, Audio out (r) (l)
7
RQT8743
Connect a TV and a DVD recorder/DVD player using HDMI cables
Connection cable (All cables are sold separately)
.
HDMI stands for High-Definition Multimedia Interface.
• The HDMI cable enables you to transmit digital audio and video signals using a single cable. You can also transmit control signals
using HDMI connections.
• The unit complies with CPPM
∗1
. It can digitally transmit surround sound in DVD-Audio sources.
∗1 Content Protection for Prerecorded Media (CPPM): This copyright protection technology prevents copying of DVD-Audio files.
• We recommend using Panasonic cables 5.0 meters long or shorter for enjoying 1125p
∗2
(1080p) pictures. They prevent picture
degradation.
∗2 1125p (1080p): a progressive (non-interlace) scanning system that sends 1,125 scan lines every 1/60 second.
• The audio signal transmitted through HDMI takes priority when you use both HDMI and digital terminals (á
pages 14 to 17) for
connection.
Video and Audio cable
Audio cable
HDMI Cable (It is recommended that you use Panasonic’s HDMI cable.)
[Recommended part number: RP-CDHG15 (1.5 m), RP-CDHG30 (3.0 m), RP-CDHG50 (5.0 m) etc.]
Stereo phono cable
When the HDMI terminal does not exist on your TV, DVD recorder (DVD player) or both
You can connect cables to S video terminals.
See page 15.
Move on to “Connect speakers”
(á page 8) in the Quick guide.
You can connect cables to component terminals.
See page 16.
You can connect cables to video terminals.
See page 14.
Step
1
White
Red
(L)
(R)
(CD)
VIDEO
CD
DVD 6CH IN
SUBWOOFER
BD/DVD/
VCR
TV/STB
FRONT A
FRONT B
CENTER
SURROUND
SURROUND BACK
Y
TV MONITOR OUT
TV / STB IN
DVD RECORDER IN
P
B
P
R
COMPONENT VIDEO
Y
Y
P
B
P
R
P
B
P
R
AC IN
R
L
R
L
R
L
R
L
BI-WIRE
LF
HF
AUDIO
LOOP
EXT
AM ANT
FM ANT
DIGITAL IN
(BD/
DVD PLAYER)
(DVD RECODER)
(TV/STB)
OPTICAL1 OPTICAL2
COAXIAL1 COAXIAL2
LOOP ANT
GND
(BD/DVD PLAYER) IN
OUT
OUT
OUT
IN
IN
IN
IN
IN
IN
OUT
SUBWOOFER SURROUND
FRONT
IN
IN
IN
IN
IN
TV/STB
VCR
DVD RECORDER
DVD RECORDER
DVD RECORDER
TV MONITOR
TV MONITOR
TV/STB
CENTER
BD/
DVD PLAYER
BD/
DVD PLAYER
(DVD RECORDER) IN
R
L
(6-16
Ω EACH SPEAKER)
A OR B / BI-WIRE (4-16
Ω EACH SPEAKER) A AND B (6-16 Ω EACH SPEAKER)
S VIDEO
75
SPEAKERS
TV
HDMI
(AV IN)
HDMI
(AV OUT)
Rear panel
DVD player
(BD player)
DVD recorder
HDMI
(AV OUT)
You can hear DVD sounds from speakers on the TV when you turn off the unit connected in the way shown above (standby
through function). This convenient function enables you to enjoy DVDs late at night.
AUDIO OUT
(R) (L)
You need a stereo phono cable for
enjoying TV with surround sound.
See “To enjoy TV with surround sound”
(á page 17) for making digital
connections (using an optical cable).
HDMI connection
The HDMI input terminal on the unit’s rear is made to specifications that presume connection of a DVD recorder/DVD player.
When other equipment is connected, sounds may not come out of the unit, or pictures shown on the equipment (TV) connected to
the HDMI output terminal may be disrupted.
In such cases, see
page 19 and make connections other than HDMI.
Note
Connect a TV and a DVD recorder
/DVD player using HDMI cables
ENGLISH
Quic
k guide
SA_XR700_EG_GN_ (RQT8743_B)ver.3.fm 7 ページ ２００６年８月３１日 木曜日 午前９時７分