Panasonic KX-TG1063 - Manual (Page 20)

Programming
20 For assistance, please visit http://www.panasonic.com/help
Programmable settings
You can customize the unit by programming the following features.
To access the features, there are 2 methods:
– scrolling through the display menus (page 20)
– using the direct commands (page 22)
L Direct command is the main method used in these operating instructions.
Programming by scrolling through the display menus
1
{ MENU}
2 Press {V} or {^} to select the desired main menu. i {SELECT}
3 Press {V} or {^} to select the desired item in sub-menu 1. i {SELECT}
L
In some cases, you may need to select from sub-menu 2. i {SELECT}
4 Press {V} or {^} to select the desired setting. i {SAVE}
L
This step may vary depending on the feature being programmed.
L
To exit the operation, press { ■} (EXIT) on the base unit or {OFF} on the handset.
Note:
L
See page 22 for the default settings.
Base unit
*1 If you program these settings using the base unit, you do not need to program the same item using a
handset.
= Base unit / Y Handset
Main menu Sub-menu 1 Sub-menu 2 Page
Caller list
W – – 28
Set answering
s Screen call – 31
Initial setting
" Ringer setting Ringer volume 14
Ringer tone –
Silent mode
– On / Off
– Start / End 25
Call block
*1 – 26
LCD contrast – –
Caller ID edit – 29
Display language – 12
Customer support
! – – –
TG106x(e).book Page 20 Friday, January 16, 2009 10:45 AM