Philips 42PF9641D/10 - Manual (Page 50)

Notes:
- only a PC with digital sound can be connected to the HDMI connection;
- if your PC does not have digital sound output, connect your PC via a VGA connector;
- before connecting your PC to the TV, select your PC monitor settings to a refresh frequency of
60 Hz;
- supported PC monitor modes:
VGA 640 x 480
SVGA 800 x 600
XGA
1024 x 768
Connect a PC EN
50
Pr Pb Y
DIGITAL
AUDIO AUDIO
HDTV & Progressive
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN
L R
EXT3
AUDIO OUT
AUDIO
OUT L R
DIGITAL
AUDIO
OUT
o
PC-VGA AUDIO IN L/R
o
VGA
2
1
VGA AUDIO in R/L
Pr Pb Y
DIGITAL
AUDIO AUDIO
HDTV & Progressive
DISPLAY SYNCHRONIZED
480p, 576p, 720p, 1080i
IN
IN
L R
EXT3
AUDIO OUT
AUDIO
OUT L R
DIGITAL
AUDIO
OUT
HDMI 1
HDMI AUDIO in L/R
HDMI 2
o o
PC-VGA AUDIO IN L/R
o o
EXT3
HDMI
DVI
2
DIGITAL
AUDIO
IN
3
1
PC equipped with a VGA connector:
1. Connect one end of a VGA cable 1 to the
video card of the computer and the other end
to the
VGA connector at the bottom of the
TV. Fix the connector firmly with the screws
on the plug.
2. In case of a Multimedia computer, connect the
audio cable 2 to the AUDIO outputs of your
computer and to the AUDIO IN L/R input of
the TV.
3. Select VGA in the Installation menu, Select
your connections, p. 32 and link it to VGA .
4. Also select AUDIO IN L/R in the same
Connections menu.
PC equipped with a DVI connector:
With Digital audio
1. Use a DVI to HDMI cable to connect to one of
the HDMI connector of your TV 1.
2. Connect the audio cable 2 to the DIGITAL
AUDIO IN connector of the TV.
3. Select the computer you have connected in the
Installation menu, Select your connections,
p. 32 and link it to
HDMI 1 or 2 .
4. Also select DIGITAL AUDIO IN in the same
Connections menu.
With Analogue audio
1. Use a DVI to HDMI cable to connect to the
HDMI 2 connector of your TV 1.
2. Connect the audio cable 3 to the AUDIO
IN L/R input of the TV.
3. Select the computer you have connected in the
Installation menu, Select your connections,
p. 32 and link it to
HDMI 2 .
4. Also select AUDIO IN L/R in the same
Connections menu.