Philips juice extractor serving pitcher HR2828 - Manual (Page 7)

3
Preparing the Appliance for Use
Before first use, wash the serving pitcher, pulp container, sieve
(CAUTION: Shredders on bottom of sieve are sharp), lid, food tray,
and pusher in warm soapy water. Rinse clean and dry thoroughly.
Keep the appliance out of the reach of children and do not let
it run unattended.
C
1 Put the serving pitcher in place on motor unit and turn
the handle in the direction of the arrow until the serving
pitcher will not go any further and locks into place. For safety,
the Juice Extractor will not operate unless the serving pitcher
and lid are securely locked into position.
C
2 Put the pulp container on the serving pitcher.
Make sure that the recesses of the pulp container cover the
projections on the serving pitcher.
C
3 Place the sieve in the middle of the pulp container.
C
4 Put the lid on the pitcher and turn it in the direction of the
arrow until it will not go any further and locks into place.
The projection of the lid now covers the handle of the serving pitcher.
NOTE: For safety, the Juice Extractor will not operate unless the
serving pitcher and lid are securely locked into position.
C
5 Put the food tray on the lid.
6 Plug the Juice Extractor into a 120V AC electrical outlet.
2 Way Safety
Lock System