Parasound HCA-1200 - Manual (Page 7)

HCA-1200 Specifications
Specifications subject to change without notice.
Continuous Power output - stereo
200 watts RMS x 2, 20Hz-20kHz, 8
Ω
300 watts RMS x 2, 20Hz-20kHz, 4
Ω
Continuous Power output - mono
600 watts RMS, 20Hz-20kHz, 8
Ω
600 watts RMS, 20Hz-20kHz, 4
Ω
Current Capacity
40 amperes continuous
57 amperes peak, up to 200msec.
Slew Rate
100V/
µ
second
Frequency response
8Hz-90kHz, +0/-3dB
Total Harmonic Distortion
< 0.08% at full power
< 0.03% typical levels
TIM
Unmeasurable
IM distortion
< 0.1%
Dynamic Headroom
> 1.5dB
Input impedance
30 k
Ω
S/N ratio
>110dB, input shorted, IHF A weighted
Damping factor
Over 120 at 20Hz
Dimensions
17 1/4" wide x 5 1/2" high x 12" deep; 19" wide using RMK-1000 rack mount
Weight
38 lbs.
Special Features
• 1kVA toroid power transformer
• 60,000
µ
fd gold capacitors in power supply
• 60MHz output transistors, in AB mode
• Cascode Class A J-FET input stage
- 7 -
• Linear Hi-Z FET driver stage
• Gold-plated input jacks
• Multiple relay protection
• Mono bridgeable