Philips 9170XLCC - Manual (Page 7)

ENGLISH 13 ENGLISH 12
symbol with a blinking power or “spark”
symbol.The spark symbol will start blinking.
This display shows an increase in shaving
minutes from 0 to 85.
C
- The Battery Display:
As soon as you connect the charging plug to
an electrical outlet, the display goes on.The
battery indication appears as well as the plug
symbol with a blinking power or “spark”
symbol.The spark symbol starts blinking.The
display shows an increase in blocks in the
battery symbol.
C
◗ Full Charge Indicator
When batteries have been fully charged,
“FULL” scrolls across the display together
with plug symbol. After a few hours the word
“FULL” stops appearing and the display shows
the remaining shaving time in minutes along
with the plug symbol.
C
◗ Minutes Left Indicator
- The Numeric Display:
The number on the display shows remaining
shaving time in minutes.
C
- The Battery Display:
The amount of filled in blocks in the battery
symbol shows the remaining shaving time or
battery power level.
Easy Read LCD Display
C
◗ LCD Display
Allows you to choose the display mode you
personally prefer.There are two display modes
to choose from: a numeric or battery symbol
display.
C
1 Press the ON/OFF button for about 3
seconds.A key symbol appears on the
display.
2 To select one of the two modes, press the
ON/OFF button briefly until the preferred
mode appears and wait a few seconds.
◗ If you do not press the ON/OFF button, the
travel lock stays activated. (see “Storage”).
NOTE: For first time use of the razor, or after
non-use for one month or more, it could take
several minutes before the display appears!
The display provides the following
information:
When you turn the razor ON or OFF the
display will come on for approximately 10
seconds.
C
◗ Charging Indicator
-The Numeric Display:
As soon as you connect the charging plug to
an electrical outlet, the display goes on.The
minutes indication appears as well as the plug