Pontiac G5 - Manual (Page 316)

Back-Up Lamps (Coupe)
To replace a back-up lamp bulb, do the following:
1. Remove the two screws from the face of the
back-up lamp.
2. Pull the lamp straight out from the fascia
pocket.
3. Hold and turn the bulb socket clockwise and
then release it from the lamp housing.
4. Pull the old bulb out of the socket.
5. Install a new bulb.
6. Reverse Steps 1 through 3 to reinstall the
back-up lamp assembly.
License Plate Lamp
To replace one of these bulbs, do the following:
1. Remove the two screws holding each of the
license plate lamps.
2. Turn and pull the license plate lamp toward
you through the opening.
3. Turn the bulb socket counterclockwise and
pull the bulb straight out of the socket.
4. Install the new bulb.
5. Reverse Steps 1 through 3 to reinstall the
license plate lamp.
316