Panasonic TU-IRD20 - Manual (Page 51)

REFERENCE
47
11 TV/DSS Switches the video input between TV and
DSS ® mode.
12
VCR Control Buttons Use when controlling an
auxiliary device, such as a VCR or laserdisc player.
13
ALT AUD (Alternate Audio) Use to step through the
available languages or audio types for a program.
14 TV/VCR Switches the video input between TV and VCR.
15 FAV Use to toggle through the favorite channel lists.
16 GUIDE Brings up the on-screen program guide.
Continue to press the GUIDE button to toggle between
the Grid and Info Guide options.
17
CHAN UP/DOWN Use to scan up and down through
the channels in the current channel list. If you are in the
program guide or menu system, use the CHAN UP/
DOWN buttons to page up and down a screen at a time.
18 POWER Turns the device you are controlling on or off.
19 R-TUNE (Rapid Tune) Moves you back and forth
between the last two selected channels.
Helpful Hints
If the selected component does not respond to the remote control,
ensure that the proper mode is selected. First, press the Mode
Selection Button that corresponds to that component. For
example, after first pressing the DSS Mode button, the remote
will remain in DSS
® mode for any following commands. If another
mode button is pressed while operating the satellite receiver, the
DSS button must be pressed again to reset the DSS
® mode
condition.