Panasonic DMR-ES40V - Manual (Page 16)

Getting started
16
VQT0R73
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [ 3, 4] and press
[ENTER].
[3] Select “SETUP” with [ 3, 4] and press [ENTER].
[4] Select “Channel” with [ 3, 4] and press [2, 1].
[5] Select “Signal Source (RF IN)” with [ 3, 4] and
press [ENTER].
[6] Select “Antenna” or “CableTV” with [ 3, 4] and
press [ENTER].
[7] Select “Set Channels Automatically” with
[
3, 4] and press [ENTER].
[8] Press [ENTER].
≥Auto Channel Setting starts. This takes a few minutes.
[9] Press [ENTER].
∫ To cancel in the middle
Press [RETURN].
∫ To exit the screen
Press [RETURN] several times.
Add or delete channels if necessary channels are not set or
unnecessary channels are set.
[1] Press the numbered buttons to select a
channel.
Antenna Mode (Airwaves)
e.g.,
“5”: [0] )[5]
“15”: [1] )[5]
CableTV Mode (Cable)
e.g.,
“5”: [0] )[0] )[5]
“15”: [0] )[1] )[5]
“115”: [1] )[1] )[5]
≥You can also use [CH, W, X] to select a channel.
[2] Press [ADD/DLT].
e.g., The channel is deleted.
Set these guide channels so you can use VCR Plus i ® system for
scheduled recording. Before starting the settings, prepare a chart
showing the station names, guide channels and channel numbers.
e.g., :
° Look up the guide channels for the stations in magazines.
°° Write down all the stations you can receive.
≥If you have connected a cable TV box or satellite receiver, the
VCR Plus _ system does not work so you do not have to set the
guide channels.
[1] While stopped
Press [FUNCTIONS].
[2] Select “Other Functions” with [ 3, 4] and press
[ENTER].
[3] Select “SETUP” with
[
3, 4] and press
[ENTER].
[4] Select “Channel” with
[
3, 4] and press
[ 2, 1].
[5] Select “VCR Plus r Ch.
Setting” with [ 3, 4]
and press [ENTER].
e.g., “Signal Source (RF IN)” is
set to “CableTV”.
[6] Use [ 3, 4] to select the
guide channel you want
to set and press [
1].
∫ If Plug-in Auto Tuning fails
PLAY
S
SCHEDULE
DVD ERASE REC REC MODE ADD/DLT
TIME SLIP
FUNCTIONS DIRECT NAVIGATOR
TOP MENU
RETURN
STATUS DISPLAY
SUB MENU
COPYING
CREATE
CHAPTER F.REC
JET REW
ADD/DLT
FUNCTIONS
RETURN
SKIP/INDEX
SLOW/
SEARCH REW FF
PLAY
OPERATION
SELECT
POWER
CM SKIP CANCEL/RESET
VOLUME CH INPUT SELECT
AUDIO
TV
TV/VIDEO
VHS DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+ CANCEL
3, 4, 2, 1
ENTER
FUNCTIONS
RETURN
ADD/DLT
CH, W, X Numbered
buttons
FUNCTIONS DVD
DVD-RAM Cartridge Protection Off
Disc Protection Off
DIRECT NAVIGATOR
SCHEDULE
VCR Plus+ 1 2 3
Other Functions Return
PLAYLISTS
FLEXIBLE RECORDING
DV AUTO RECORDING
SETUP
DISC MANAGEMENT
ENTER
Playback
Schedule
Off Timer
Remote Control Code
Clock Settings
6 Hours
Set Code 1
Quick Start
Restore Default Settings
On
Channel
Setup
Disc
Video
Audio
Display
SETUP
Manual Channel Captions
VCR Plus i Ch. Setting
Signal Source (RF IN)
Set Channels Automatically
Channel Captions
Preset Channel Captions
CableTV
Off Timer
Remote Control Code
Clock Settings
6 Hours
Set Code 1
Quick Start
Restore Default Settings
On
Channel
Setup
Disc
Vid
SETUP
Antenna
CableTV
Signal Source (RF IN)
∫ Adding and deleting channels
STEP 3 Channel settings
∫ Guide channel settings for VCR Plusi
system
Station
name
Guide
channel °
Channel
number °°
Channel setting
CBS 04 04 Unnecessary
HBO 33 15
Enter channel 15 next
to Guide Channel 33.
Nickelodeon 38 20
Enter channel 20 next
to Guide Channel 38.
The unit’s display
Channel 15 Deleted
Off Timer
Remote Control Code
Clock Settings
6 Hours
Set Code 1
Quick Start
Restore Default Settings
On
Channel
Setup
Disc
Video
Audio
Display
SETUP
Manual Channel Captions
VCR Plus i Ch. Setting
Signal Source (RF IN)
Set Channels Automatically
Channel Captions
Preset Channel Captions
CableTV
Channel
Setup
Disc
Video
Audio
Display
TV Screen
VHS
SETUP VCR Plus i Ch. Settings
Guide Channel Cable Channel
---
--- 125
1
---
--- 2
3
ENTER
Channel
Setup
Disc
Video
Audio
Display
TV Screen
VHS
SETUP VCR Plus i Ch. Settings
Guide Channel Cable Channel
--- 4
5
6
---
--- 7
8
---
---
ENTER
ES40VP&PC.book 16 ページ ２００５年９月６日 火曜日 午前１０時２３分