Panasonic KX-DT321 - Manual (Page 19)

Document Version 2009-03 19
WALL MOUNTING TEMPLATE
1. Drive the screws into the wall
as indicated.
2. Hook the unit onto the screw
heads.
Note:
Make sure to set the print size to
correspond with the size of this
page. If the dimensions of the
paper output still deviate slightly
from the measurements indicated
here, use the measurements
indicated here.
100 mm (3-15/16 in)
83 mm (3-1/4 in)
for base unit
One screw at either point
One screw here