Plasmon MOD 910 - Manual (Page 15)

SCSI Identifier
Each device on a SCSI bus requires a unique address to be set which
maybe in the range of 0 to 6 as address 7 is usually reserved for the
host computer address. The MOD910 is shipped with a default address
of 1 which will usually suffice in most cases.
Please refer to diagram on Appendix C
General Precautions for MOD910E
✗ Never plug or un-plug any connectors or cables from the
device on the SCSI bus whilst power is applied to either host
computer or any devices attached.
✗ Do not use the unit under the following operating
environments:
Places with high humidity
Exposed to direct sunlight
Locations subject to excessive shock or vibration
✗ Do not cover ventilation slots as these are provided for cooling.
✗ Do not place the drive near a printer.
✗ Never attempt to disassemble the unit.
✗ Never touch the surface of a recordable disk.
✗ Do not allow any foreign object or liquid to enter the unit.
✓ Always remove the disk before moving the unit. This will
ensure that the optical head is securely positioned for shipping.
✓ Keep the packaging material should the unit have to be
transported.
6
97705183 A
User Manual