Philips CAM150 - Manual (Page 10)

10
Charge the built-in battery
1
Unlock the fastener to flip open the
protective cover at the bottom of the
camcorder.
2
Connect the camcorder to a PC through
the supplied USB cable.
The status indicator on the shutter
»
button starts flashing in orange.
3
Wait until the status indicator stops
flashing and turns to green steadily.
The built-in battery is fully charged.
»
Tip
The camcorder is fully charged for first-time use. •
It takes about 3 hours to fully charge the built-in •
battery via the PC.
9
Press to confirm the time setting.
The first-time setup is complete.
»
The camcorder enters viewfinder
»
mode.
Tip
See ‘Use your camcorder - Adjust settings’ for more •
settings.
Select a scene
1
In viewfinder mode, press to enter the
window for scene selection.
2
Press +/- to select a scene.
3
Press to confirm and go back to
viewfinder mode.
Or press • to cancel and go back to
viewfinder mode.
EN