ProForm PFB48030 - Manual (Page 28)

M10 Nylon Locknut (97)
M6 Washer (101)
M8 Washer (100)
M8 Nylon Locknut (96)
M8 x 12mm Shoulder
Bolt (131)
1/4" x 9.5mm Allen
Head Set Screw (120)
M6 Nylon Locknut (124)
25mm Square Inner Cap (31)
25mm Round Outer Cap (94)
25mm Retainer Ring (93)
25mm Round Angled Cap (62)
25mm Round Inner Cap (26)
32mm Square Inner Cap (66)
M10 Washer (99)
PART IDENTIFICATION CHART
—Model No. PFB48030 R1103A
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST in the center of this manual. Important: Some parts may
have been pre-assembled for shipping purposes. If a part is not in the parts bag, check to see if it has
been pre-attached.