Pioneer VSX-D511 - Manual (Page 21)

Controls and displays 04
21
En
4 2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Prologic II decoding.
5 ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the input signal (can only
be used with an analog signal).
6 DIRECT
Lights when source direct playback is in use.
This function bypasses all tone, balance, DSP
and Dolby Surround effects.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected.
9 Speaker indicator
Shows if the speaker system is on or not.
SP
3A means speakers are switched on. SP 3
means the headphones are connected.
10 Character display
11 ADV. SURR (Advanced Surround)
Lights when one of the Advanced Surround
listening modes of the receiver is selected.
12 LOUDNESS
Lights during Loudness listening.
13 TUNER indicators
STEREO : Lights when a stereo FM broadcast is
being received in auto stereo mode.
MONO : Lights when the mono mode is set
using the
MPX button.
TUNED : Lights when a broadcast is being
received.
14 Master volume level
Shows the overall volume level. --- dB indicates
the minimum level, and – 0dB indicates the
maximum level.
Depending on the level settings you make for
each channel, the maximum level can
range between –10dB and – 0dB.