Panasonic WV-BM500 - Manual (Page 11)

-9-
SYSTEM CONNECTION
1. Single Monitor Connection
2. Multiple Monitor Connection
Internal Sync Connection
• Connect the Video Input Connector (11) on the
monitor to the Video Out Terminal of cameras with
75-ohm coaxial cables.
External Sync Connection
• When a non-composite video signal is connected
to the video monitor, it must also have an external
composite SYNC signal connected to the video
monitor.
• Set the Sync Selector Switch (13) at EXT position.
• Loop through connection of sync signal is the
same as the case of Video Signal.
120V
AC
60 Hz
120V
AC
60 Hz
120V
AC
60 Hz
Last Video Monitor
Camera
Camera
Coax. Cable
WV-BM500
WV-BM500
Coax.
Cable
Coax.
Cable