Pioneer VSX-2016AV - Manual (Page 31)

USB playback 06
31
En
Chapter 6:
USB playback
Using the USB interface
It is possible to listen to two-channel audio
1
using the
USB interface on the front of this receiver. Connect a
USB mass storage device 2 as shown below.
1 Press USB ( SHIFT + TUNER ).
2 Connect your USB device.
The USB terminal is located on the front panel.
3 Press (play) to start playback.
Files/folders play in sequential order based on the
filename (according to the Unicode standard). Within a
given directory, all files are played before continuing to
folders/subfolders.
• Make sure the receiver is in standby when
disconnecting the USB device.
Basic playback controls
The following table shows the basic controls on the
remote for USB playback.
Important
If a USB ERR message lights in the display, try following
the points below:
• Switch the receiver off, then on again.
• Reconnect the USB device with the receiver switched
off.
• Select another input source (like DVD/CD ), then
switch back to USB .
• Use a dedicated AC adapter (supplied with the
device) for USB power.
If this doesn’t remedy the problem, it is likely your USB
device is incompatible.
Compressed audio compatibility
Note that although most standard bit/sampling rate
combinations for compressed audio are compatible,
some irregularly encoded files may not play back. The list
below shows compatible formats for compressed audio
files:
• MP3 (MPEG-1/2/2.5 Audio Layer 3) – Sampling rates:
8 kHz to 48 kHz; Bit rates: 8 kbps to 320 kbps (128
kbps or higher recommended); File extension:
.mp3
• WMA (Windows Media Audio) – Sampling rates: 32
kHz / 44.1 kHz; Bit rates: 32 kbps to 192 kbps (128
kbps or higher recommended); File extension:
.wma ;
WMA9 Pro and WMA lossless encoding: No
• AAC (MPEG-4 Advanced Audio Coding) – Sampling
rates: 11.025 kHz to 48 kHz; Bit rates: 16 kbps to 320
kbps (128 kbps or higher recommended); File
extension:
.m4a ; Apple lossless encoding: No
Note
1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback).
2 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital audio players (MP3 players)
of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback.
• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no responsibility for any loss
of data that may occur when connected to this receiver.
• With large amounts of data, it may take longer for the receiver to read the contents of a USB device.
Button What it does
Starts normal playback.
Pauses/unpauses playback.
Press to start fast reverse scanning (press twice
for high-speed scanning).
Press to start fast forward scanning.
(press twice for high-speed scanning).
Skips to the start of the current track, then
previous tracks.
Skips to the next track.
PHONES SYSTEM
SETUP
TUNING/
STATION TUNER
EDIT SPEAKERS RETURN TONE
MULTI JOG
MCACC
SETUP MIC DIGITAL IN AUDIO R L VIDEO
VIDEO/GAME INPUT S - VIDEO USB
USB mass
storage device
This receiver
Error What it means
USB ERR1
The power requirements of the USB device
are too high for this receiver.
USB ERR2 The USB device is incompatible
USB ERR3 See USB interface on page 71 for more on this
error message.
VSX-2016_HY.book.fm 31 ページ ２００６年２月２４日 金曜日 午後１２時４０分