Philips 180B2S - Manual (Page 72)

7) Connect to PC
(a) Turn off your computer and unplug its power cable.
(b) Connect the monitor signal cable to the video connector on the back of your
computer.
(c) Connect the audio and microphone cables to the audio and mic connectors on
the back of your computer.
(d) Plug the power cord of your computer and your monitor into a nearby outlet.
(e) Turn on your computer and monitor. If the monitor displays an image,
installation is complete.
RETURN TO TOP OF THE PAGE
Accessories (optional)
file:///D|/K1/english/180b2sw/install/access.htm (8 of 8) [3/26/2003 10:57:11 AM]