1 remote control, Inserting the batteries, Programming the remote control – Pixel Magic Systems MTV5000 User Manual

Page 7: Backlight, Tour of magic tv

Advertising
background image

13

12

Programming the Remote Control

Step 1.

Place the Magic TV™ Remote Control and the TV remote control

on a flat surface, 3cm apart and with the emitters facing each other.

Step 2.

Press and hold both the

and

buttons for

2 seconds until the LED Indicator flashes slowly.

The Magic TV™ Remote Control is now in "learning mode".

For Samsung, Sony or Sharp TVs
Press either

for Samsung,

for Sharp or

for Sony preset

remote control commands. Then go to step 6.

For other TVs
Step 3.

Press the button you want programmed (

for example).

The LED Indicator will light.

Step 4.

Press and hold the Power button on your TV remote control

until the LED Indicator turns off.

Step 5.

After 2 seconds the LED Indicator will flash slowly again;

please repeat steps 3 and 4 for each button.

Step 6.

When finished, press the

button to exit "learning mode".

To reset the buttons to factory defaults, press and hold both the
and the lower corner

button for 2 seconds until the LED

Indicator flashes slowly, then press the

button.

Backlight

The Magic TV™ Remote Control is equipped with a light sensor,
and will automatically illuminate when a button is pressed and the
room is dark enough.

OK

RED

3

2

1

3cm

2

Tour of Magic TV™

2

Tour of Magic TV™

2.1

Remote Control

The Magic TV™ Remote Control is used to
control every aspect of Magic TV™. In order
to make using the remote as easy as possible,
a backlight is included and 4 of the buttons
can be programmed with commands for
your TV.

Inserting the Batteries

• Push in the ridged area of the battery

cover and slide the cover down

• Insert four AAA batteries (supplied) by

matching the + and – marks on the
batteries to the + and – marks in the
battery compartment. Note that two of the
batteries will slide under the casing slightly

• Replace the battery door

If the batteries are working and are inserted
correctly, the LED Indicator will flash when
any button is pressed.

Power On/Off

LED Indicator

Magic TV™ button (access
to all menus)

Aspect Ratio Correction
mode selection

Electronic Programme

Guide (EPG)

Back

Learning buttons

TV Power & TV Input

Learning buttons Vol+ & Vol-

Mute

Interactive Television Services

Programme information

Navigation of on-screen
menus. OK during Live TV
will show channel list

Channel Up/Down or
Page Up/Down when
in Menus

Pauses Live TV and

Recorded Programmes

Record

Rewinds Playback

Skips backwards 8 seconds

during Playback

Resumes Playback

Alphanumeric keys

Live TV. Jumps to Live TV
from any menu

Adds and removes bookmarks
during playback

Stops Playback
and Recording

Speeds up Playback.
Press again for faster speed

Skips forwards 30 seconds
during Playback

Contextual navigation.
Refer to onscreen hints for
exact function

R

CH

VOL

i

1

2

3

4

5

6

7

8

0

9

LIVE

ABC

GUIDE

ASPECT

TV

DEF

GHI

JKL

MNO

PQRS

TUV

WXYZ

CLEAR

ENTER

TEXT

OK

Cancel or Delete

Advertising