Pioneer KURO PRO-141FD - Manual (Page 78)

78
En
07 Helpful Information
Picture does not appear
properly • Check the setting for Color Decoding when using INPUT 2 or INPUT 3 (pages 52 and 53).
• Check the setting for Signal Type.
• Check the setting for Video when using INPUT 4 through INPUT 8 (page 54).
• Check the setting for Signal Format when using INPUT 3 through INPUT 8 (page 54).
After-image lag • If a bright or still image was on screen for a long period before switching to a darker
image, the original image may appear as an after-image or ghost. Try playing another
bright image, switching the picture quickly many times, or show a very active scene.
• Use the Long Life Settings function (see “4.2.1 Extend Your Panel Life”)
• Display the Video Pattern screen to help reduce after-image lag.
KURO LINK
Issue Possible Solutions
KURO LINK does not
function • Check the connections between the panel and the HDMI equipment.
• Confirm that the settings for the panel are correct.
• Confirm that the equipment is HDMI compliant.
• Confirm that settings for the equipment are correct.
For details, refer to the operating instructions that came with the equipment.
Error message: “The
device cannot be
operated. Please check
connection”
• Check the connections between the panel and the HDMI equipment.
• Confirm that settings for the equipment are correct.
For details, refer to the operating instructions that came with the equipment.
No picture • Check the connections between the panel and the HDMI equipment.
• Confirm that settings for the equipment are correct.
For details, refer to the operating instructions that came with the equipment.
Panel sounds/noises • Some sounds are appropriate for plasma technology.
Examples: fan motor noise, electrical circuit humming, glass panel buzzing, etc.
Brightness on sides of
screen are uneven • Display content that completely fills the screen until unevenness is minimized.
• Change the AV mode setting.
IP Control
Issue Possible Solutions
Web browser screen
does not open after
entering the correct IP
Address • Confirm that the indicator turns on after setting the LED option to On.
• Check the cable connection if the indicator does not light.
• Confirm that the other end of the cable is properly connected to the PC, hub or router if
the indicator does not light.
The indicator lights but
the web browser screen
does not open • Confirm that the other end of the cable is not connected to any other device than
Ethernet (such as a telephone).
• When using a DHCP, confirm that the IP Address allocated by the server has not
changed (the address may change as a DHCP server reallocates the addresses
periodically).
Entering an IP Address
fails even after activating
the DHCP function • Confirm that the DHCP server is activated within the network.
Picture
Issue Possible Solutions
PRO-141FD_PRO-101FD.book Page 78 Monday, May 12, 2008 3:27 PM