Philips Video Camera - Manual (Page 33)

32 33
Model EDC-142E EDC-141E EDC-143E EDC-142E1 EDC-144E EDC-142E2
EDP 74081 74086 74091 74093 74100 74117
Shutter modes – High and Low Speed shutter – High and Low
Speed shutter
–
Synchronization Internal/AC line lock, phase adjustment via remote control
White balance Modes: Manual, Automatic, Indoor, Outdoor, ATW
Video output 1Vp-p, CVBS, 75ohms, BNC
Zoom range F1.4-3.0/4.1-73.8mm (18x optical,
12x digital zoom)
F1.6/
3.6~82.8mm
(23 optical, 10x
digital zoom)
F1.4/3.8-
83.6mm (22x
optical, 12x
digital zoom)
F1.6~F80/3.5
~ 91mm (26x
optical, 12x
digital zoom)
F1.4/3.8-
83.6mm (22x
optical, 12x
digital zoom)
Horizontal angle of view 48° (Wide); 2.7° (Tele end) 54° (Wide); 2.5°
(Tele end)
52° (Wide); 2.4°
(Tele end)
54.2° (Wide);
2.2° (Tele end)
52° (Wide); 2.4°
(Tele end)
Iris control Automatic (with manual override)
Focus control Automatic with manual override
Minimum object distance (MOD) 0.3m
Menu driven set-up ON/OFF switchable
Text display 16-character labels
Menu languages English English, German, French, Spanish, Portuguese, Italian, Polish
Alarm processing – Programmable alarm action with selectable priority levels
Alarm inputs – 8, selectable between NO and NC
Bubble 4.9” (125mm), clear acrylic plastic
Control interfaces RS-422/RS-485,
9600Baud, 999
camera ID adres-
ses selectable.
Besides the key-
board control via
the eneo EDC-
KBD(M) series,
the control via
matrix switchers
and keyboards
from Pelco (D+P
protocol), Ernitec,
etc. is available.
RS-422/RS-485, 9600Baud, 999 camera ID adresses selectable. Besides the keyboard control
via the eneo EDC-KBD(M) series, the control via matrix switchers and keyboards from Pelco
(D+P protocol), Ernitec, Philips G3, Sensormatic RS-422, (back channel via RS-422 is not
activated), Vicon and Dynacolor is available.
Keyboard control Direct mode control with Eneo EDC-KBD(M) keyboard series, or in conjunction with the eneo Triplex Multiplexer
series VBMT/VCMT-8000 and DVR series DLR(2) and DXR
Auxiliary outputs – 4 relays with NO/NC contact, 24VDC/1A resistive
Remote control Camera remote settings via keyboard
Operation protection Available
Backup Non-volatile back box memory stores all camera and site-specific dome settings
Supply voltage 18 to 30VAC (24VAC nominal), 50/60Hz
Power consumption Approx. 20watts
Temperature range 0°C to +50°C
Protection rating IP40
Housing Black plastic for indoor drop-ceiling mount
Dimensions See drawing
Weight 1.3kg 1.5kg