Panasonic TC-50PU54 - Manual (Page 9)

9
Power cord connection
To attach To remove
Insert it firmly until the
tabs on both sides click
into place. Keep pushing both
sides until they snap
and pull.
Attaching Ferrite Core
Be sure to attach the provided ferrite core to the HDMI cable/USB cable (not supplied) to reduce interference or electrical
noise.
Attach the ferrite core as close as
possible to connector on the TV side as
shown. Close the ferrite core until it clicks.
(example: USB connector)
Installing the remote’s batteries
Open
Hook
Note the correct polarity
(+ or -).
Close
Caution
Incorrect installation may cause
battery leakage and corrosion,
resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.