Printronix P5000LJ Series - Manual (Page 101)

P-Series XQ Emulation
101
Define LF Code
• LF = CR + LF. Forces an automatic carriage return with each line feed
command received. The next print position is print position 1 of the next
line.
• LF = LF. Does not perform an automatic carriage return when a line feed
command is received. The next print position will be the current print
position of the next line.
Compressed Print
Controls which host command sets compressed printing.
• CHAR 01 SOH
• CHAR 03 ETX
• CHAR 09 HT
Elong/Alt. Font
Controls which host command sets elongated (double high) fonts and
extended character set.
• ELNG=BS (hex 08) FONT=SO (hex 0E)
• ELNG=SO FONT=BS
HS Print
Controls which host command sets high speed printing.
• CHAR 02 STX
• CHAR 03 ETX
• CHAR 09 HT
EVFU Select
Controls how the printer handles vertical formatting.
• Enable. Enables the VFU and selects P-Series compatible Electronic
Vertical Format Unit (EVFU).
• Disable. Disables VFU processing.
Upr. Case Select
Controls how the printer handles lowercase characters it receives from the
host computer. When enabled, all characters will be printed in uppercase.
• Disable. Prints lowercase characters received from the host computer as
lowercase, and uppercase characters received from the computer as
uppercase.
• Enable. Prints lowercase characters received from the host computer as
their corresponding uppercase equivalents; uppercase characters
received from the computer are printed as uppercase.