Philco Crafts PVD1000 - Manual (Page 11)

-11- EN
1
Press [SEARCH MODE]
repeatedly until the Time
Search display appears
during playback.
2
Press the desired time
location on the disc, using
the Number buttons within
30 seconds.
1
Press [SEARCH MODE] repeatedly until the marker display
appears.
2
Use [s / B] to select
markers.
3
Playback will restart from
the specific point which
you have set as the
desired marker.
ENTER ENTER ENTER
1:29:00 TOTAL
1
Press [SEARCH MODE] repeatedly until the marker display
appears during playback.
2
Use [s / B] to select the
markers.
3
Press [ENTER] to set the
markers.
Using Time Search
1:29:00 TOTAL
Hint
• When there is no need to enter a number, “0” appears
automatically.
For example, “0 : 0-: --” appears in the Time Search display if the
total time of the title or track is less than 10 minutes.
• Press [CLEAR] to erase the incorrect input at step 2.
• For Audio CDs, Track Search is not available for Program and
Random Playback.
• Time Search is not available when you play the Video CD with
PBC function.
1 2 3
4 5 6
7 8 9
0
This feature allows you to assign a specific point on a disc to be
called back later.
To set a marker
ENTER ENTER ENTER
1
Press [RETURN ] to exit the marker display.
RETURN
SEARCH
MODE
Hint
• Opening the disc tray or putting unit in standby mode will erase all
markers.
• Selecting “AC” at step 2 in the section “To set a marker” or “To
return to the marker later” will also erase all markers.
• To clear a marker, select the marker to be cleared at step 2 in the
section “To set a marker” or “To return to the marker later,” and
then press [CLEAR].
• The marker display will disappear in about 30 seconds when
there is no output.
• Marker Setup is not available when you play the Video CD with
PBC function.
Search Function
To return to the marker later
Functions
To exit the marker display
SEARCH
MODE
PLAY
Marker Setup
ENTER
ENTER
SEARCH
MODE
PLAY
E6C61UD.indd 11 E6C61UD.indd 11 2006/08/18 13:00:32 2006/08/18 13:00:32