Panasonic KX-PW76CL - Manual (Page 12)

12
2
Receiving documents
Facsimile Operations
With this unit, you can choose beforehand whether to receive faxes by “Receive in memory” or
“Receive on recording paper”.
Receive in
memory
(Default Setting)
The received fax will be stored in memory.
You can check the contents on the display
and print out the necessary information only.
The received fax will be printed on recording
paper.
(When a fax is received, the unit will start
printing after correspondence is completed.)
How to use
How the memory indicator works
(Changes each time it is pressed)
Receive on
recording paper
LIGHT
OFF
Display when fax is received in memory Retrieve faxes stored in the memory
Display the number of faxes
stored in memory
Shows that a new fax has been
stored in memory.
FLASHES
Flashing will stop after
all new faxes have been displayed
or printed out.
F 4 F 3
1. When the unit is stand-by mode,
press
F 4
2. Press or to choose the
desired fax to display.
◆
◆
3. Press to see the fax
(see below for information about
the display).
● To print out the displayed page,
press .
F 3
4. To see other faxes,
press and continue from step 2 again.
To go back to the stand-by mode, press .
F 4
First page Second page Third page
Scroll pages (Example : Documents consists of 3 pages.)
To enlarge or reduce content
To show the next page, turn to the right.
To show the previous page, turn to the left.
Reduce : Press . Enlarge : Press .
Reduce Normal
Enlarge
(2 times) Enlarge
(4 times)
To scroll to the display
To scroll right : Press .
F 4
To scroll above : Press .
To scroll left : Press .
F 3
To scroll below : Press .
• Normal display (Can be scrolled above and below)
• Enlarge display (Can be scrolled above, below to the left and right.)
F 4
F 3