POLAR SMOOTH AGILE DMT X1 - Manual (Page 24)

24 SMOOTH AGILE DMT X1
ASSEMBLY
STEP 7: Connect the Pedal Arm to the Pedal Swing Arm
(A) Slide the 20 x 78 – M14 x 35mm Bolt (505) through the 20.7 x 29.1 x
0.3mm Wave Washer (521), Pedal Arm – Right (107), and Pedal Swing
Arm (108) then secure by 8mm Allen Key (C)
(B) Press the Pedal Arm Front Pivot Cover (702) into the ends of the Pedal
Arm – Right (107)
(C) Repeat the above procedure to assemble the left side.
505 X2
521 X2
702 X2
702
505
108
107
105
C
505
107
108
521
521