Pioneer PRO-940HD - Manual (Page 62)

62
En
Adjustments and Settings 11
Using the 3DYC and I-P Mode
1
Press HOME MENU.
2
Select “Picture”. ( / then ENTER)
3
Select “Pro Adjust”. ( / then ENTER)
4
Select “Others”. ( / then ENTER)
5
Select an item to be adjusted. ( / then ENTER)
• Choose “3DYC” or “I-P Mode”.
6
Select the desired parameter. ( / then ENTER)
7
Press HOME MENU again to exit the menu.
NOTE
• In I-P Mode, the individual parameters are unavailable for
480p and 720p@60 Hz signals.
Sound adjustments
Adjust the sound to your preference. See page 57.
1
Press HOME MENU.
2
Select “Sound”. ( / then ENTER)
3
Select an item to be adjusted. ( / )
4
Select the desired level. ( / )
5
Press HOME MENU again to exit the menu.
NOTE
• To restore all factory defaults, press / to select “Reset” in
step 3 then press ENTER. A confirmation screen appears.
Press / to select “Yes” then press ENTER.
3DYC
3DYC optimizes characteristics for separating brightness signals and
color signals. This works for both video and still images.
Selections Off Deactivates 3DYC
High Enhanced 3DYC
Mid Standard 3DYC
Low Moderate 3DYC
I-P Mode
I-P Mode optimizes conversion from interlace signals to progressive
signals. This works for both video and still images.
Selections 1 Optimum for video images
2 Standard setting
3 Optimum for still images
Item button button
Treble For weaker treble For stronger treble
Bass For weaker bass For stronger bass
Balance Decreases audio from the
right speaker Decreases audio from the
left speaker
Bass
Balance
Treble
Reset
FOCUS
Front Surround
0
0
Off
Off
2
Sound STANDARD
PDP_PRO1540HD.book Page 62 Wednesday, August 2, 2006 6:01 PM