Philips AVENT SCD510 User Manual

Page 10

Advertising
background image

Dry materials

Material thickness

Loss of range

Wood, plaster, cardboard, glass

(without metal, wires or lead)

< 30cm/12in

0-10%

Brick, plywood

< 30cm/12in

5-35%

Reinforced concrete

< 30cm/12in

30-100%

Metal grilles or bars

< 1cm /0.4in

90-100%

Metal or aluminium sheets

< 1cm/0.4in

100%

For wet and moist materials, the range loss may be up to 100%.

Features

adjusting loudspeaker volume

1

Press the volume + or - button on the baby unit until the desired loudspeaker volume for

the baby unit has been reached. (Fig. 20)

Note: You only have to adjust the baby unit volume when you use the talk function (see below).

2

Press the volume + or – button on the parent unit until the desired loudspeaker volume for

the parent unit has been reached (Fig. 21).

Note: If the volume is set to a high level, the units consume more power.

talk function

You can use the TALK button on the parent unit to talk to your baby (e.g. to comfort your baby).

1

Press and hold the TALK button and talk clearly into the microphone from a distance of

15-30cm (Fig. 22).

, The green LINK light starts flashing.

2

Release the TALK button when you have finished talking.

Sound level lights

The parent unit continuously monitors the sound level in your baby´s room and the sound level

lights let you know if there is any activity. If your baby cries, you see the sound level lights light up on

the parent unit.

- As long as the baby unit does not detect a sound, all sound level lights on the parent unit are

out.

- When the baby unit picks up a sound, one or more sound level lights on the parent unit go on.

The number of lights that go on is related to the loudness of the sound picked up by the baby

unit.
nightlight

1

Press the nightlight button Q on the baby unit to switch on the nightlight. (Fig. 23)

2

Press the nightlight button Q again to switch off the nightlight.

, The nightlight dims gradually before it goes out completely.
Tip: Switch off the nightlight when you operate the baby unit on the non-rechargeable batteries. This

saves power.

EngliSh

10

Advertising
This manual is related to the following products: