Printronix T3306 - Manual (Page 33)

2–13 Setting Up the Printer
Optional Peel and Present
Perform the following steps to load media for peel and present operation.
1. Pull the peel roller bracket away from the peel and present mechanism
using the two release tabs as shown in
Figure 2–10 .
2. Following Steps 1 through 4 under the Roll-Feed Media Lodging section
above.
3. Thread the media over the top of the fixed bracket and under the peel
roller of the roller bracket as shown in Figure 2–11.
Figure 2–11. Peel and Present Mechanism