Panasonic CQ-VD6505U - Manual (Page 28)

27
28 CQ-VD6505U
English
AV1/AV2
ASPECT
MUTE
MENU
NAVI
TUNE
FOLDER
ALBUM
TRACK
SRC
VOL
ASP
P-MODE
PWR
TILT
CQ-VD6505U
SRC
Press [SRC] to change to the desired
mode.
Note:
¡
You can set up the system so that the AV mode is not
selected (source skip). (
a page 39) (AV set to NAVI
INPUT is not skipped even if is set to
.)
¡ If no operation is performed for 10 seconds or is
touched, the operation buttons disappear.
¡ AV terminal is not used for the Panasonic car
navigation system (available in future). Refer to
for setting. ( a System Upgrade
Guidebook)
NAVI SETUP
ON
SOURCE SKIP
[SRC]
Source Button
To switch Operation Screen ON, touch the center of
touch panel or press [ENTER] on the remote control.
Preparation:
¡
Connect an optional external device to the AV1/AV2.
You can view the images and listen to the sounds from
the connected external devices in the AV1/AV2 mode
respectively.
Please refer to the separate “System Upgrade Guidebook” for how to operate this unit when optional devices are
connected.
q Touch “Source Button”.
d
w Touch /
(AV1/AV2) on the
Source Selection
Screen.
AV Mode Selection