Planar LX1200TR User Manual
Page 19
LX1200TR User’s Manual (020-0512-00A)
Page 19 of 20
Connectors
• J1: Video input
15 pin D-Sub VGA, female, Zhangjiagang SBFR15 or equivalent
• J2: Power interrupt
CviLux CP35 2P*H00 (black); terminal part number 43030-0007
Mating connector is Molex Micro Fit Jr., Molex part number 43025-0200, terminal part
number 43030-0007.
The power interrupt switch is connected to a single pole single throw normally open push
button (SPST N.O) switch. This can be connected to your docking station or computer’s
power button.
• J3: Audio input
3mm jack
• J4: USB upstream Type B
Type B for connecting to the computer
• J5: DC power input
Chassis-mounted, two-pin connector (Molex Mini Fit Jr Header
5569 Molex p/n 39-30-0020)
The table below lists the connector’s pin assignments, and the
figure at right shows the physical layout as seen by the interface
cable from the DC power source.
Pin number
Signal
1 (Square)
Positive input voltage (12V)
2 (D-Shape)
Return (GND)
• J7, J8: USB downstream Type A