Pioneer Elite BDP-05FD - Manual (Page 12)

01
12
En
18 OUTPUT RESOLUTION
Use these to switch the output video resolution from the
HDMI OUT
or COMPONENT VIDEO output terminals (page 25).
19 PLAY MODE
Press to display/hide the Play Mode screen (page 29).
20 POP UP MENU/MENU
Press to display the BD-ROM or DVD-Video menus.
21 DISPLAY
Press to display disc information (page 29).
22 TOOLS
Press to display/hide the TOOLS menu (page 23).
23 RETURN
Press to return to the previous screen.
Front Panel
1  STANDBY/ON
Press to turn the power on and off.
2 Remote control sensor
Point the remote control to this, then operate it within approximately
23 feet.
The player may have trouble capturing remote control signals if
there is a fluorescent light nearby. If this happens, move the player
away from the fluorescent light.
3 Front panel display
4 Touch sensor – Touch the center of the words or marks lightly
to operate.
 OPEN/CLOSE – Press to open and close the disc tray.
RESOLUTION – Press to switch the output video resolution from
the HDMI output or component video output terminals
(page 25).
/ – Press to skip to the beginning of the previous title/
chapter/track/file. Press and hold to start reverse scanning
(pages 26 and 27).
/ – Press to skip to the beginning of the next title/
chapter/track/file. Press and hold to start forward scanning
(pages 26 and 27).
 – Press during playback to pause. Press again to restrart
playback.
 – Press to stop playback.
5 
Press to start playback.
6 HDMI indicator
This lights when an HDMI-compatible device is connected
(page 14).
7 Touch sensor indicator
This lights when the touch sensor is touched.
8 Disc tray
9 FL OFF indicator
This lights when Off is selected with FL DIMMER.
10 HD indicator
This lights when an HDMI cable is connected and video signals are
being output with a resolution of 1080/60i, 1080/60p, 1080/24p or
720/60p. It also lights when a component video cable is connected
and video signals are being output with a resolution of 1080/60i or
720/60p.

1 5 2 3 4
6 8 7 9 10