Panasonic SL-CT350 - Manual (Page 4)

Press after all
desired tracks
have been
programmed.
Press. (Main unit) /
Press during play.
(Remote control)
(“M”disappears.)
9
(Forward)
:
(Backward)
1/;
(Main unit)
∫/1
(Remote control)
MEMO
(Main unit)
The anti-skip function (ANTI-SKIP
SYSTEM) reduces or eliminates
skipping caused by vibration. You can
change the anti-skip memory time.
While stopped, each time you
press and hold [MEMO]
M
2
1 0
AB repeat
(
➪below)
` ` RANDOM
A
1
B `
RANDOM `
3d-1(3D) 3d-2(3D)
S-XBS S-XBSr
1
2 5 1 5
1
Sound
quality
4
Each time you press [EQ]
[Press [EQ] twice consecutively while “3D”
is displayed. (Main unit)]
Boosts
the bass
No
display
(canceled)
Enhanced
S-XBS
Sound field
of 3D
Enhanced
3d-1
∫
(Main unit)
∫/1
(Remote control)
1/;
(Main unit)
∫/1
(Remote control)
9
(Forward)
:
(Backward)
Elapsed play time
of track
Number of tracks
Total play time
1/;
(Main unit)
Pause
Stop/
Turn off
≥Press again to restart play.
≥Press again to turn the unit off.
(Main unit)/
Press and hold to turn the unit off.
(Remote control)
≥If the unit is left in stop mode for
approximately 10 minutes, it turns
itself off automatically.
Search
≥Press [:] twice consecutively to
skip to the previous track during play.
≥You cannot use [:] to skip to any
previous tracks during random and
random repeat (
➪right) modes.
≥You can only search within the current
track except for during all track repeat
(
➪right) and regular play.
During play,
press and hold.
Skip
Press.
Press.
Press.
Play
Press.
1
1 0 0
Current track
number
≥Play begins from the track where you
last stopped play (Resume function).
(This will be cancelled if you open the
lid while play is stopped.)
Open lid OPEN 1
Slide in
direction
of arrow.
HOLD
(function
lock)
HOLD 1
(Main unit)
➪ HOLD
(Remote control)
Slide in direction of arrow.
(Slide in opposite direction to
cancel.)
≥The unit and remote control each
have independent HOLD switches.
Button control guide
References to the remote control apply only to SL-CT352.
VOL
r (Increase)
s (Decrease)
Volume
control
(0–25)
Press.
Inserting/removing a disc
MODE
(Main unit)
Play
modes
EQ
(Remote control)
Each time you press and
hold [EQ]
Tone off Tone on
bP on bP oFF
∫Specifying the AB segment
Press [MEMO] at the start point (A)
and once more at the end point (B).
≥Stop or skip ( ➪left) to cancel.
≥If you do not specify point B this will
automatically be set as the end of the
disc. Repeat begins when this point is
reached. You can specify point B again
by pressing [MEMO].
Each time you press [MODE]
One
track
repeat
All
track
repeat
Random Random
repeat
No
display
(canceled)
≥“3d-1” or “3d-2” disappears after
being selected and “3D” appears
instead.
≥The effect may differ with different
kinds of music.
≥Depending on the recording
conditions, sound may be interrupted
when switching between EQ settings.
RQT7830
While stopped, press [:]
or [9] to select the track,
then press [MEMO].
Sound
enhanced mode,
10-second
anti-skip memory
Anti-skip
enhanced mode,
45-second
anti-skip memory
Track number
Sequence number
POS 2 POS 1
Will appear after [MEMO]
is pressed
Note on CD-R and CD-RW (CD-DA)
For CD-DA format, use a music disc and finalize § it after recording. The unit
may not be able to play some discs due to the condition of the recording.
§A process performed after recording that enables CD-R/CD-RW players to
play audio CD-R and CD-RW.
Program
play
(desired
tracks
only)
Anti-skip
mode
Remote
control
operation
tone
SL-CT352
EQ
Play
MEMO
Confirm
tracks
selected
∫
(Main unit)
∫/1
(Remote control)
Press during
play.
Cancel
≥The volume returns to 10 when you
disconnect the power source.
Repeat to program up to 20 tracks.
During play
While paused
or