Panasonic DMC-LC20PP - Manual (Page 71)

71
Warning Indication
[MEMORY CARD FULL]
The capacity of the memory card is
full. Change the new memory card or
delete unnecessary images for
increasing recordable number.
[PLEASE SET THE DATE/TIME]
The date has not been set up. Set the
date.
[THIS MEMORY CARD IS
PROTECTED]
The card is write-protected. Confirm
the contents and change the new
memory card or cancel the protect.
[NO VALID IMAGE TO PLAY]
When no images are recorded in the
memory card, this message will be
displayed if it is played back.
[NO MEMORY CARD]
The memory card is not inserted.
Insert the memory card.
The electrode side of a card is dirty
with dust and the fingerprint. Wipe it
with a soft dry cloth etc.
[PLEASE FORMAT THE
MEMORY CARD]
The unformatted memory card is
inserted. Format it.
[PLEASE WAIT]
This message is displayed while
saving the image data in the memory
card.
[NOW DELETING]
This message is displayed while
deleting the image data.
[PROTECTED]
This message is displayed when
trying to delete the protected picture.
[NOW FORMATTING]
This message is displayed while
formatting the memory card.
[MEMORY CARD ERROR]
Failed access to memory card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Take out the card, or turn the camera
[ON] again after once turning it [OFF].
Or the card may be destroyed.
[CAN’T BE SET ON THIS
PICTURE] / [CAN’T BE SET ON
SOME PICTURES]
If the image is not based on the DCF
standard, it is not possible to set the
DPOF.