Panasonic SC-HT15 - Manual (Page 13)

Set
tings
13
RQT7
94
9
St
ep 4
4
Change the settings to suit your equipment to the environment in which you are using it. Before making any changes, read the
descriptions of the settings, note the factory settings and ranges, and refer to the equipment’s instructions.
POWER INPUT SELECTOR 2
2
TUNE MENU
% DIGITAL %PL
H. BASS DOWN
VOLUME
PHONES
UP
POWER INPUT SELECTOR 2
2
TUNE MENU
Enter the distance of the front, center and surround speakers
from the seating position.
The factory settings are:
DISTANCE
FRONT:
CENTER:
SURROUND: 10 FEET
10 FEET
5 FEET
Change the setting for the DIGITAL IN terminals (OPT1, OPT2,
COAXIAL) on the rear of the unit if the equipment you have
connected is different to that labeled.
The factory settings are:
Note
You can allocate only one piece of equipment per terminal. So
for example if you change “TV” from “OPT1” to “OPT2”, “DVR”
will automatically switch to “OPT1”.
D-INPUT (digital input)
FRONT
COMPLETE
10 FEET
FRONT CENTER
SURROUND
3 FEET 30 FEET
D-INPUT
SETUP
DISTANCE
COMPLETE
SETUP
DISTANCE
D-INPUT
DR COMP
A/D ATT
TV
TV DVR DVD
OPT 1
OPT 1 OPT 2 COAX
1
2
3
4
5 5
4
3
2
1
DISTANCE
D-INPUT
DR COMP
A/D ATT
INPUT SELECTOR
2
2
TUNE
2
2
TUNE
2
2
TUNE
2
2
TUNE
2
2
TUNE
MENU
INPUT SELECTOR
2
2
TUNE
MENU
TV:
DVR:
DVD: OPT1
OPT2
COAX
Press at the same time.
Press at the same time.
Press at the same time.
Enter the setup mode. Enter the setup mode.
Select “DISTANCE”.
Select the speaker.
Change the setting.
Exit the setup mode.
Select “D-INPUT”.
Select the input position.
Change the setting.
Exit the setup mode.
OR
Press at the same time.
OR
Settings
Switch on.
Repeat steps 3 and 4 Repeat steps 3 and 4
Step
DISTANCE
è
See below
D-INPUT
è
See below
DR COMP
è
See page 20
A/D ATT
è
See page 20
SC-HT17PP-EN.fm Page 13 Thursday, March 17, 2005 9:56 AM