Panasonic SC-HT15 - Manual (Page 21)

Op
eratio
ns
21
RQT7
94
9
Other functions Making a recording
You can record to a unit connected to DVR/VCR OUT.
You can record any analog source except DVR/VCR IN.
1.Press [INPUT SELECTOR] to select the source to be
recorded.
2.Begin recording.
Follow your recording unit’s operating instructions.
3.Start the source to be recorded.
Note
• (SC-HT17) When you select DVD ANALOG 6CH mode, only
sound from the front left and right channels is recorded.
• This unit cannot record digital sources. Connect through the
analog terminals and select "ANALOG" input.
Recording on other equipment
POWER INPUT SELECTOR 2 2 TUNE MENU
% DIGITAL %PL
H. BASS
INPUT SELECTOR
You can adjust the effect of MUSIC and PANORAMA with the
center width control.
This adjustment helps you realize a more natural sound image
when listening to music. Move sound out into the front speakers
to improve the overall front image, or add sound to the center
speaker to fix the center image.
You can choose a level between 0 (the center speaker is
dominant) and 7 (center sound is spread out).
Remote control
The default level is 3.
1.Press [EFFECT] to select “C-WDTH”.
2.Press [–/L] or [+/R] to adjust the effect.
You can adjust the effect of MUSIC and PANORAMA with the
dimension control.
You can make up for differences in the output level of the front
and surround speakers.
You can choose a level between –3 and +3 — Increase the level
to move sound to the front speakers, decrease to move it to the
surround speakers.
Remote control
The default is level 0.
1.Press [EFFECT] to select “DIMEN”.
2.Press [–/L] or [+/R] to adjust the effect.
You can adjust the sound field by adjusting the level of the
speakers and the delay time of the surround speakers. These
adjustments can be made for each SFC mode.
Remote control
To adjust the speaker level
1.Press [-LEVEL/–TEST] to select the speaker
channel.
Each time you press the button:
C → RS → LS → SW
2.Press [–/L] or [+/R] to adjust the level.
C, RS, and LS:–10 dB to +10 dB
SW:– – – (off) ↔ MIN ↔ 1 – 19 ↔ MAX
Remote control
To adjust the delay time
1. Press [EFFECT].
2. Press [–/L] or [+/R] to change the delay time.
The default is 50 mSEC. (10 mSEC – 100 mSEC)
Center Width Control "C-WDTH"
Dimension Control "DIMEN"
Adjusting SFC effects
INPUT MODE
MUSIC AV/MOVIE
SFC
EFFECT TONE/
BALANCE
ENTER
TOP MENU
SUB MENU/
PLAY LIST
SUBWOOFER
TV/VIDEO
RETURN
MUTING
% PL
TV VOL TV VOL
/L /R
OFF
-LEVEL/
- TEST
- H.BASS/
- C.FOCUS
REC MODE REC
DVD REC TV
EFFECT
/L /R
-LEVEL/
- TEST
The RESET function
The operation settings for the unit will be initialized to the
settings made at the time of shipment.
However, any preset radio stations will not be erased.
1.Press [MENU] to select “RESET”.
2.Press [TUNE 2 or 1] to select “YES”.
To cancel, select “NO”.
3.Press [MENU].
POWER INPUT SELECTOR 2 2 TUNE MENU
% DIGITAL %PL
H. BASS
2
2
TUNE MENU
SC-HT17PP-EN.fm Page 21 Thursday, March 17, 2005 9:56 AM